CO2 and fibre laser engraving for premium gifts in Mexico
Laser engraving vaporises the surface layer of the material with a focused beam of light, leaving a permanent mark that does not wash off, fade or peel. We operate CO2 lasers for wood, glass, acrylic, vegetable-tanned leather and selected composites; fibre-optic lasers for metals like stainless steel, anodised aluminium and titanium; and a UV marking station for parts where the heat of conventional lasers would damage the finish.
Where laser engraving looks its best
Stainless steel is the natural home of fibre-laser engraving — thermos bottles, water bottles, keychains, metal USB drives, aluminium pens, recognition plaques and everything that ends up in the hand of a board member or director. The mark reads in silver tones on silver, with enough depth for the fingertip to feel it. On anodised aluminium the contrast is stronger: the anodic layer vaporises and exposes the base metal, which yields white-on-colour or black-on-colour engraving depending on the anodising.
Wood — oak, walnut, maple, bamboo — takes CO2 laser engraving with a tone ranging from caramel to chocolate depending on the fibre density. It is the ideal material for gift boxes, cheese boards, notebooks with an MDF cover and bottle stoppers for spirits. Glass gets engraved with a surface technique: the laser produces controlled micro-fractures that give the frosted look, used on wine glasses, decanters and premium spirit bottles. Vegetable-tanned leather is engraved with low-power CO2, leaving a tobacco-coloured mark that reads beautifully on natural tones.
Premium gift applications
Thermos bottles and metal drinkware
Stainless-steel thermos, sport bottles, coffee tumblers. Logo engraving on the front or side, with the option of personalised text per recipient. For board kits, AGM gifts, anniversary milestones and year-end presentations.
Premium notebooks and journals
MDF, faux leather or PU cover with laser-engraved logo. Accepts everything from simple logos to detailed illustrations — the line between what can and cannot be engraved is set by the minimum detail size and the stroke depth.
Gift boxes and presentation cases
Wooden wine boxes, fountain-pen cases, jewellery boxes, gourmet kit presentation. Laser engraving on the lid becomes part of the opening ritual and signals quality from the first second.
Plaques, trophies and recognition
Engraved acrylic plaques, crystal trophies with a wooden base, employee recognition awards, office-installation plaques. Precise vector engraving with typography and logo at the size you specify.
Laser engraving versus printing and embroidery
The defining difference is permanence: laser engraving does not wear off, peel or rely on ink that can run. For gifts that will be used daily (thermos, pens, keychains) or that will be archived (boxes, plaques, journals), laser is the right investment because the brand stays legible for the full useful life of the product. UV print on the same article looks brilliant at first but wears with friction; pad printing on metal feels like a sticker on top; laser becomes part of the material.
On cost, laser engraving is competitive for short and mid runs because it requires no physical setup — it is programmed from a vector file and engraved in minutes. For very large runs (past 500 identical pieces) it competes with pad printing and screen printing on metal; we recommend pricing all three to make the best call. On curved parts like thermos bottles and water bottles, the laser mounts on a rotary chuck that follows the product geometry and keeps the line even.
MOQ, pricing and artwork prep
The MOQ for laser engraving is one piece — there is no physical setup like screen printing, so you can order from a single engraved thermos for an individual gift up to a 5,000-piece campaign. We quote per machine-minute and material type; on complex parts (glass, acrylic) the per-minute cost is higher because the machine runs at reduced speed.
Artwork is prepared in vector — AI, EPS or PDF with text converted to outlines. For variable-data engraving (recipient name on each thermos) we accept a CSV and generate the file per piece automatically. On logos with very fine detail (under 0.5 mm) or very tight fills, we thicken in pre-press so the laser does not burn out the detail. On reflective or anti-fingerprint-coated materials we run a physical test before production. Quotes are in MXN ex-IVA; the 16% IVA is itemised on a CFDI 4.0 stamped by SAT against your RFC.
FAQ — laser engraving in Mexico
What is the cost-effective MOQ for laser engraving?
One piece. The technique requires no physical setup, so individual orders are welcome. For runs above 100 pieces the per-minute cost drops because of nesting optimisation on the work area.
What materials cannot be engraved?
PVC, vinyl and most soft plastics release toxic fumes under CO2 laser and we do not process them. Chrome-plated metal is also off the table because the beam reflects. Any new material goes through a sample test before sign-off.
Is the engraving coloured?
No — laser engraving is monochrome; it vaporises material and exposes the substrate colour or the process result (dark on wood, white on anodised aluminium, frosted on glass). Colour is added with a follow-up UV print when needed.
Can you engrave on curved parts?
Yes — we have a rotary chuck that follows the product geometry. On thermos bottles, drink bottles and cylindrical parts the line stays even with no distortion.
How fine is the detail?
The focused beam is 0.1 mm in diameter, so fine detail reproduces well. Type from 6 points up engraves cleanly; below that depends on the typeface and the material.
Request a laser engraving quote
Send us the product to be engraved, material, quantity and whether you need variable data per name. If you have a vector file, attach it; if not, we will vectorise the logo from the image with a physical test on the actual product before production.
Corp-Merch.MX is an independent engraving and premium corporate gift workshop. We are not a partner, sponsor or official supplier of the product brands, trade shows, venues or events referenced on this page. Trademarks and brand names belong to their respective owners and are mentioned solely for descriptive purposes to identify the production context.