Method × industry matrix
Every Mexican business sector runs on a different uniform spec, a different per-employee budget, and a different wash cycle. The decoration technique we apply to your order is decided from that reality, not from a generic catalog. This page documents the combinations we have shipped for hotel groups in Cancún, fintechs in Mexico City, IMMEX plants in the Bajío, and retail chains with brick-and-mortar locations across the country.
A software developer in Polanco needs an embroidered hoodie whose monogram survives 80 industrial wash cycles, because his team rotates hoodies on a three-year replacement cycle. A logistics operator working the El Salto industrial corridor in Jalisco needs a high-visibility vest with screen print that holds up to solvent and to the altiplano sun, because the uniform lives in open lockers between shifts. A medical-aesthetics clinic in Mérida needs scrubs decorated with sublimation, because 100% cotton is autoclaved and screen print flakes off by the third cycle. Method choice is not a creative call. It is a textile-engineering decision tied to the sector.
Corp-Merch.MX runs nine industrial decoration techniques (screen print, flat embroidery, 3D puff embroidery, DTF, DTG, sublimation, laser engraving, pad print, and heat transfer) and has produced for sectors ranging from aerospace in Querétaro to agroindustry in Sinaloa. The matrix below is not a sampler: every pair shown has been validated in real production runs, with clients who can vouch for the result.
Before we pick between embroidery and DTF, we run four questions with the client. The first one is the fabric base: a 65/35 poly-cotton twill is not the same as a recycled performance polyester with hydrophilic treatment. The second one is the wash cycle: a restaurant chain launders uniforms at 90 °C with chlorine; an insurance corporate sends them to dry cleaning once a month. The third one is the number of logo colors: a one-color logo embroiders clean and cheap; a five-color logo almost always migrates to DTF or sublimation. The fourth one is expected service life: if the garment is consumable (event tee), the most cost-effective technique wins; if it is a 36-month investment (executive uniform), durability weighs more than unit price.
With those four variables the matrix resolves in a single call. On each combination page we publish the technical specs: embroidery thread count, DTF film microns, sublimation temperature, screen print ink deposit. If the combination you need is not listed, get in touch: we have probably already made it, we just have not documented it.
The 18 cards below summarize the most-requested combinations throughout 2025. Each card links to a detail page with product photography, fabric specifications, lead times, and price ranges in MXN ex-VAT.
Use case: executive shirts, staff jackets, spa towels for hotel groups in Cancún, the Riviera Maya, and Los Cabos. 7-thread embroidery with Coats Astra thread to guarantee resistance to 80 °C industrial laundry. Compatible with 65/35 and 50/50 poly-cotton blends.
Open combination cardUse case: spa robes, 100% polyester housekeeping uniforms, all-inclusive entertainment tees. Sublimation handles photos and gradients that embroidery cannot, with the constraint that the base has to be white or light polyester.
Open combination cardUse case: premium metal mugs, stainless steel tumblers, executive gift-box plates, metal USB drives. Indelible ink-free marking with depth controlled by wattage. The finish that Mexico City fintechs associate with the precision of their own regulatory work.
Open combination cardUse case: executive pens, plastic USB drives, promotional phone cases. One- and two-color pad printing on curved surfaces, ideal for merchandise items with non-flat geometry and mid-volume runs.
Open combination cardUse case: tees and coveralls for Bajío plants (Querétaro, San Luis Potosí, Aguascalientes). One- and two-color plastisol screen print on combed cotton, engineered to withstand the industrial wash cycle applied by third-party textile laundries.
Open combination cardUse case: short and variable versions of the IMMEX uniform where screen print stops being cost-effective below 200 units. DTF on PET film with hot-melt adhesive, applicable to poly-cotton blends and technical textiles.
Open combination cardUse case: reusable cotton bags for department stores and self-service chains. DTF supports photographic reproductions and gradients that conventional screen print cannot resolve on the texture of non-woven or woven cotton.
Open combination cardUse case: capsule t-shirt collections for boutiques in Mexico City's historic center, Guadalajara, and Mérida. Full-color sublimation on white polyester with heat-sealed side seams, suited to short runs with multiple design variants.
Open combination cardUse case: dealer uniforms, plant helmets, after-sales shirts. 7- and 9-thread embroidery on technical stain-resistant blends, for OEMs with assembly plants in Silao, Saltillo, and Hermosillo.
Open combination cardUse case: patient gowns, surgical scrubs, nursing uniforms. Water-based ink screen print cured at 160 °C on pre-shrunk 100% cotton, validated to withstand the hospital wash protocol with hypochlorite.
Open combination cardUse case: school uniforms for private schools in Mexico City, Puebla, and Monterrey. Embroidery of the school crest and grade on blazer, jacket, or polo shirt, with thread color-matched to the institutional identity guide.
Open combination cardUse case: front aprons, chef hats, service tees. High-temperature-cure plastisol screen print on poly-cotton blends rated for enzymatic detergent and quaternary ammonium sanitizer.
Open combination cardUse case: high-visibility vests, courier tees, thermal backpacks. High-opacity screen print inks on 3M Scotchlite reflective tape, garment validated under NOM-035 for work in public roadways.
Open combination cardUse case: hard hats, reinforced gloves, work-site tees. Heat transfer on rigid and semi-rigid substrates where embroidery and screen print have no anchor, with high-temperature adhesive for outdoor exposure.
Open combination cardUse case: glass bottles, wooden cases, primary and secondary packaging for DTC brands. CO₂ and fiber laser marking on rigid substrates, with calibrated depth to preserve the vapor barrier of the container.
Open combination cardUse case: Class I and II medical devices, dropper bottles, cardboard cases. Pad printing with ISO 10993-certified inks on validated substrates, with batch documentation for COFEPRIS compliance.
Open combination cardUse case: FR (fire retardant) shirts, boot covers, textile helmets for field workers at Pemex and CFE. Sublimation on Nomex and Proban FR bases, with inks certified not to compromise the thermal protection of the substrate.
Open combination cardUse case: tool identification plates, part serialization, welcome kits for the Querétaro aerospace cluster. YAG and fiber laser marking with ±0.05 mm tolerance for AS9100 traceability.
Open combination cardUse case: work shirts for field hands, sun hats, hydration backpacks in Sinaloa, Sonora, and Tamaulipas. UV-resistant ink screen print on heavyweight cotton blends, high-visibility color palette.
Open combination cardEvery Mexican sector carries its own regulatory weight. The food industry operates under NOM-251 and textile innocuity verification, which rules out inks with solvents not rated for indirect food contact. The healthcare sector requires per-batch traceability and, in some cases, ISO 10993 biocompatibility validation when the garment comes in contact with compromised skin. The public education sector must observe LFPC and the SEP graphic identity manuals when subsidized uniforms are in play. The financial sector follows CNBV guidelines on institutional image and, in the case of fintechs, the PCI-DSS standards which do not affect the marking but do govern how end-beneficiary data is handled.
For clients invoicing abroad, we issue CFDI 4.0 with the Carta Porte 3.0 complement when the shipment crosses customs, and a generic exporter RFC where the IMMEX regime applies. All prices are quoted in MXN ex-VAT and can be converted to USD or EUR at the FIX rate published by Banco de México on the invoice date.
The lead times shown on each card are production times; they do not include shipping. Once an order enters the workshop, screen-print and embroidery runs ship in 8 to 12 business days. Sublimation and DTF average 5 to 7 days. Laser engraving and pad printing close in 3 to 5 days on stable geometry. For clients with hard deadlines, we run a 60-day consignment inventory program: the merchandise is staged in Mexico City and delivered to the metropolitan area in 24 hours, and to the rest of the country in 3 to 5 business days via tracked parcel.
If the combination your company needs is not listed above, do not assume we do not run it. Send us the project description, the estimated volume, and the target date: we will reply within 24 hours with a technical opinion and a formal quote.
Tell us your industry, the decoration method of interest, and the approximate volume. We will email a PDF with textile specifications, photographic samples of analogous cases, and a formal quote in MXN with VAT broken out.
Start with what you know. We’ll work through the details together.