The Mexican manufacturing operator rotates between morning, evening and night shifts under temperatures that go from 8°C in the cold room to 42°C in the injection plant. What they wear decides whether they finish the shift incident-free or leave with heat stress, chafing or medical leave. The corp 49 final bundle ships the industrial shirt with NOM-004-STPS reflective tape, 100% cotton 14 oz denim pants with reinforced stitching, 3M H-700 hard hat with four-point suspension, steel-toe and dielectric industrial boots, MIFARE RFID PVC badge for access control and attendance, and waist bag with zip closure for personal effects. The CFDI 4.0 invoice goes out monthly with key G03 (general expenses) under the uniform and work equipment line, 100% deductible under the general regime.
The Mexican manufacturing plant that rotates plant operators in the first 60 days loses, on average, between 1.4 and 2.1 months of gross salary per failed hire in recruiting, training and ramp-up cost. Early attrition in manufacturing doesn't get fixed with better filters: it gets fixed with a uniform the operator is comfortable wearing, PPE that meets NOM, and badging that eliminates manual attendance. The corp 49 final bundle organises all three.
The industrial shirt is made of 220 g/m² 100% cotton gabardine with French-seam stitching on main seams, metal buttons, flap chest pocket, divided lower pocket for phone, 5 cm reflective tape on chest, back and shoulders. NOM-004-STPS compliant for materials handling and NOM-017-STPS compliant for personal protective equipment. The garment survives 80 industrial washes per the manufacturer's technical sheet.
The 14 oz 100% cotton denim pants have reinforced stitching on the crotch, knees and pockets, five jeans-style pockets, belt loops, metal button closure with reinforcement rivet and 5 cm hem. NOM-004-STPS compliant for load handling and survives continuous plant abrasion. The size curve is documented per client with XS to XXL series.
The steel-toe industrial boots comply with NOM-009-STPS for foot protection and NOM-113 for safety-toe footwear. Double-density polyurethane sole, dielectric for electrical work, anatomical footbed with lumbar support, antimicrobial inner lining and hydrocarbon resistance. ASTM F2413 certified. Sizes 23 to 31 with documented curve.
The complete kit weighs 4.2 kilos and ships in a polyethylene bag with content label, size and applicable NOM compliance. Each element carries an internal serial number and manufacturer lot for traceability in case of recall or STPS audit.
220 g/m² 100% cotton gabardine shirt with long sleeve, sport collar, metal buttons, two flap chest pockets with button, interior phone pocket, 5 cm reflective tape on chest, back and shoulders. NOM-004-STPS and NOM-017-STPS compliant. Corporate logo embroidered on left chest (8 cm) and operator name on right chest (5 cm). Sizes XS to XXL. Colours: white (production), navy (maintenance), grey (quality), green (logistics). Survives 80 industrial washes.
14 oz 100% cotton denim pants with five jeans-style pockets, reinforced stitching on crotch, knees and pockets, industrial belt loops, metal button closure with rivet, 5 cm hem. NOM-004-STPS compliant. Logo embroidered on right rear pocket (5 cm). Sizes 28 to 44 (waist) with lengths 30, 32 and 34. Classic indigo blue. Resists continuous plant abrasion.
Type I class E industrial hard hat with four-point suspension, ratchet adjustment, nylon chin strap, accessory slot (face shield, hearing protection, lamp). NOM-009-STPS and ANSI Z89.1 compliant. Corporate logo on the front with vinyl decal. Colours per function code: white (operators), yellow (visitors), blue (middle management), orange (brigade members), green (new personnel). Useful life of five years with scheduled replacement.
Industrial boots with steel toe, double-density polyurethane sole, dielectric for electrical work, anatomical footbed with lumbar support, antimicrobial inner lining, hydrocarbon resistance. NOM-009-STPS and ASTM F2413 certified. Sizes 23 to 31 with documented curve. Black colour. Replacement every 12 months under intensive use or earlier if the sole shows critical wear.
The corp 49 final bundle runs in two invoicing modes. The first is closed monthly order with CFDI 4.0 issued at month close and line-by-line technical description. The second is annual contract with fixed unit price invoiced against actual monthly delivery, with payment complement at 30 days when the corporate runs on credit lines.
USO CFDI depends on the client's tax regime. For Régimen General, it invoices on key G03 (general expenses) under the uniform and work equipment line. For RESICO, the same key applies because the uniform counts as deductible expense. Accounting validates ahead of the first batch to confirm the right key and the specific expense account.
The 16% IVA breaks out line by line on the CFDI 4.0. For free-zone deliveries (typical of IMMEX with a plant in Baja California, Sonora or Tamaulipas), IVA is calculated at 0% and the Free Zone complement attaches with the SAT authorisation number. For deliveries with Carta Porte across state lines, the Carta Porte 3.0 complement attaches with the carrier's data.
Cancellation or correction of the CFDI runs within 24 hours of the request. Size changes after delivery are handled by replacement with an additional charge and a new CFDI for the additional piece. A kit not delivered because of a withdrawal before the first day is invoiced only when order confirmation was signed by HR at least 5 business days in advance.
The recommended curve for a 120-operator plant is: shirts in XS 5%, S 25%, M 35%, L 25%, XL 10% with reserve for replacements; pants in sizes 28-30 (15%), 32 (30%), 34 (30%), 36-38 (20%), 40-44 (5%) with lengths 30 (20%), 32 (60%), 34 (20%); hard hats in one size with universal adjustment; boots in curve 23-25 (10%), 26-28 (45%), 29-31 (45%).
Shirt colours follow the plant's function code: white for production, navy for maintenance, grey for quality, green for logistics, yellow for visitors. Pants stay in classic indigo blue across all cases. The hard hat follows the NOM-026 code for visual function identification. Colours get selected on the first order and stay stable to build brand identity.
For corporates with multiple plants across states (manufacturing in Guanajuato, assembly in Chihuahua, distribution in Jalisco), we run segregated stock per location with independent invoicing per RFC. Consolidation of shirts, pants and boots stock runs 8 weeks ahead for monthly series of 50 kits or less, and 12 weeks ahead for mass onboarding of more than 200 operators.
Pricing in MXN before 16% IVA. The corp 49 final bundle starts at $1,890 MXN per unit from MOQ 30. In monthly series of 80 kits or more, the unit cost drops to $1,640 MXN. In annual contracts above 1,200 kits with monthly deliveries, the unit cost drops to $1,480 MXN with safety stock reserved at our CDMX and Guadalajara warehouses. The CFDI 4.0 invoice is issued at month close with full deductibility under uniform expense.
Production runs 18 to 22 business days for shirts and pants with personalised embroidery and NOM-certified boots. Series above 200 kits require 28 to 32 business days with an 8-week lead time before the first day of operation. Plant delivery goes out 1 to 3 days before start with tracked courier and acknowledgement from the HR area.
For IMMEX corporates in the free zone, the kit is assembled in Tijuana or Monterrey with cross-border delivery in 24 to 48 hours and Carta Porte at 0% IVA. For corporates with multiple legal entities and centralised HR, we run a consolidated kit with breakdown per entity on one invoice with separate lines per RFC.
Yes. Each shirt is individually embroidered with the operator's name and their area. The list ships in Excel format with columns for name, employee number, area, size and RFC when required for invoicing. Embroidery goes on the right chest with consistent typography. The list is locked 8 business days before delivery to guarantee production time. For series above 200 pieces, we run robotic embroidery with optimised production time.
The uniform is considered delivered to the operator and logged in the logbook. No return or replacement applies to the corporate. The corporate decides whether to deduct residual value from severance (common practice in manufacturing and construction) or absorb it as a period expense. The original invoice remains as support for the deductible expense. For operators leaving before 30 days, the uniform invoices in full because it was delivered and used on plant.
Yes. For IMMEX plants in Baja California, Sonora or Tamaulipas, we deliver into free zone with 0% IVA CFDI and the Free Zone complement attached. The Carta Porte is issued with origin at our Tijuana or Matamoros warehouse and destination at the client's plant. For IMMEX with multiple plant deliveries inside the free zone, 0% stays in place with a residential address complement per delivery.
Yes. The industrial boots in the corp 49 final bundle comply with NOM-009-STPS for foot protection and NOM-113 for safety-toe footwear. ASTM F2413 certification covers steel toe resistant to 75 foot-pound impact and 2,500 pounds compression. The dielectric withstands 18,000 volts in wet test. The polyurethane sole resists hydrocarbons and common industrial chemicals.
Yes. For corporates with electronic access control systems, we include PVC badge with MIFARE Classic 1K or NTAG213 RFID technology depending on the client's reader. The badge carries operator photo, name, employee number, area, validity and QR code for verification. It invoices separately with its own line on the CFDI 4.0 and ships with retractable badge holder for plant use.
Yes. For night shifts or plants with low lighting, we run industrial shirt with class 2 reflective tape (double horizontal tape on torso and two vertical tapes on shoulders) that meets NOM-152 and ANSI/ISEA 107 class 2. The shirt is in yellow-lime or fluorescent orange for maximum visibility. It invoices with an additional charge for the extra reflective tape and is documented as compliance with the safety norm.